A Circuit Model for Two-Path Cutoff Waveguide Dielectric Resonator Filters

reportActive / Technical Report | Accession Number: ADA247785 | Open PDF

Abstract:

This thesis describes the development of a CAD circuit model for two- path cutoff waveguide dielectric resonator filters. The model was verified using published data of known designs in X-band waveguide. Results from the model agree very well with experimental data. Also, a method for designing this type of filter is proposed. It makes use of commercially available CAD software. An example of the design procedure is given, along with experimental data obtained from a filter manufactured according to the design.

Author(s):
Miller, Gregory A.
Author Organization(s):
NAVAL POSTGRADUATE SCHOOL MONTEREY CA
Descriptive Note:
Master's thesis
Pagination:
0071

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release
Distribution Statement:
Approved For Public Release; Distribution Is Unlimited.

RECORD

Collection: TR
Identifying Numbers
Monitor Series:
NPS
 Subject Terms
Joint Capability Areas:
JCA_1.3.2_Personnel Management; JCA_5_Command and Control; JCA_4.6_Engineering; JCA_5.3_Planning; JCA_1.2.5_Lessons Learned
Modernization Areas:
Microelectronics; 5G
Communities of Interest:
Advanced Electronics
Descriptor(s):
*DIELECTRICS, COMPUTER PROGRAMS, EXPERIMENTAL DATA, WAVEGUIDES, CIRCUITS, X BAND, WAVEGUIDE FILTERS, FILTERS, RESONATORS, THESES, MODELS
Field(s)/Group(s):
Electrical and Electronic Equipment, Electricity and Magnetism
Keyword(s):
*DIELECTRIC FILTERS, *DIELECTRIC RESONATORS, CIRCUIT MODELS, THESES
Report Date:
1992 Mar 01