Coastal Engineering Studies in Support of Virginia Beach, Virginia Beach Erosion Control and Hurricane Protection Project. Report 3. Evaluation and Design of Beach Fill

reportActive / Technical Report | Accession Number: ADA221549 | Open PDF

Abstract:

A study was conducted to determine beach-fill berm dimensions in order to provide backshore areas with sufficient protection from storm-induced flooding. The beach-fill design was part of a beach erosion control and hurricane protection project along approximately 6 miles of Virginia Beach, Virginia. A modified Kriebel cross-shore numerical model was used to evaluate various berm dimensions for several hurricane and northeastern storm events. Results of the modeling effort indicated a 100-ft-wide berm with an elevation of 5.4 ft National Geodetic Vertical Datum would provide sufficient protection for the 100-year storm event. Grain size analysis of the native beach and seven borrow areas indicated that an overfill ratio of 1.37 was appropriate for the design. Applying this value, initial beach-fill volumes were calculated in addition to 2- and 5-year advanced nourishment quantities. Keywords Shore protection Beach nourishment Borrow material Dune erosion Grain size analysis Numerical modeling.

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release
Distribution Statement:
Approved For Public Release; Distribution Is Unlimited.

RECORD

Collection: TR
Identifying Numbers
Subject Terms