Calibration Loading of a Strain-Gauged Diverless Helicopter Weapon Recovery System.

reportActive / Technical Report | Accession Number: ADA151486 | Open PDF

Abstract:

This memorandum from Australia presents the results of a ground calibration loading test carried out on the Diverless Helicopter Weapon Recovery System DHWRS. The DHWRS is essentially an aluminum alloy 6061-T6 cage, suspended by a cable from a helicopter, that is used to recover Mk48 torpedoes from the sea. It had been found that some DHWRS used in service had developed cracks at the welds in the aft ring. It was decided that the structural integrity of the DHWRS should be verified. This was done by a calibration loading test to determine the strains for typical loading conditions, and for a load of 24050N, which corresponds to the US Navy static proof load for the acceptance of the DHWRS. A regression analysis was carried out on the loadstrain data. Equations relating applied load to measured strain are presented for several locations, including the critical position on the aft ring. Stress levels for a load of 24050N were calculated from the loadstrain data. Keywords include Recovery vehicles, and Underwater equipment.

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Identifying Numbers
Subject Terms