Frequency Converter Portable, Alternating Current Multifrequency, 10 KW. Volume I.

reportActive / Technical Report | Accession Number: ADA035043 | Open PDF

Abstract:

The Delco Electronics three-phase static frequency converter uses the Power Center approach to precision waveform generation. With this technique, 80 of the power to the load is controlled directly by a thyristor bridge circuit between a dc voltage supply and a three-phase load. The remaining 20 of the power is transferred to the load via a series of low impedance taps on an autotransformer. The taps are sequentially connected to the load such that a low harmonic content, stair-step approximation to a sine wave is provided. The purpose of this project was to determine the applicability of the Delco inverter design approach to the development of Army portable frequency converters.

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Identifying Numbers
Subject Terms