FABRICATION OF DIELECTRIC SWITCH ELEMENTS.

reportActive / Technical Report | Accession Number: AD0669622 | Need Help?

Abstract:

The report describes the steps to be taken in the fabrication of switch elements for a solid-dielectric low-inductance switch which can be used in high-energy discharge circuits. The elements are used in a type of switch having an inductance of 1 x 10 to the minus 9th power H, current carrying capability of 1000,000, and switch delay time of from 0.1 to 0.0000003 sec. Switches of this kind have been used at 15 kV and higher, with a low-inductance capacitor bank. Author

Author(s):
Zepko, George W.
Author Organization(s):
STEVENS INST OF TECH HOBOKEN N J DAVIDSON LAB
Descriptive Note:
Final rept.,
Pagination:
0020

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Identifying Numbers
Report Number(s):
1219
Contract/Grant Number(s):
DA-18-001-AMC-932(X)
Project Number(s):
DL-3143/443
 Subject Terms
Joint Capability Areas:
JCA_6.1.3_Switching and Routing; JCA_6.1_Information Transport; JCA_6_Net Centric
Communities of Interest:
Energy and Power Technologies
Descriptor(s):
(*ELECTRIC SWITCHES, DIELECTRICS), MANUFACTURING, INDUCTANCE, CAPACITORS, POLYESTER PLASTICS, FILMS, PLASTIC COATINGS, POLYETHYLENE PLASTICS, ALUMINUM, WIRE, FOILS(MATERIALS), TAPES, CELLULOSE ACETATES
Field(s)/Group(s):
Electrical and Electronic Equipment
Report Date:
1967 Dec 01