HOT LIQUID VULCANIZATION OF SILICONE RUBBER INSULATED WIRE AND CABLE,

reportActive / Technical Report | Accession Number: AD0656074 | Need Help?

Abstract:

Silicone rubber insulated wire and cable can be hot liquid vulcanized using similar techniques to those used for hot air vulcanizing. The major advantage of hot liquid vulcanization is the faster vulcanization rates which can be obtained. Silicone rubber insulated wire and cable can be vulcanized approximately twice as fast with hot liquid as hot air. Hot liquid vulcanization of silicone rubber insulated wire and cable should be an important consideration for manufacturers who wish to extrude silicone rubber insulated wire and cable at high extrusion rates and with a minimum amount of capital investment for vulcanizing equipment. Author

Author(s):
Nizinski, S. J.
Author Organization(s):
DOW CORNING CORP MIDLAND MICH
Supplementary Note:
Prepared for presentation at the Annual Wire and Cable Symposium (11th) held at Asbury Park, N. J., 27-30 Nov 1962.
Pagination:
0007

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Subject Terms
Joint Capability Areas:
JCA_6.1.1_Wired Transmission; JCA_6.1_Information Transport; JCA_6_Net Centric
Communities of Interest:
No COI(s) Identified
Descriptor(s):
*SILICONE PLASTICS, VULCANIZATION, ELECTRICAL INSULATION, ELECTRIC WIRE, ELECTRIC CABLES, LIQUIDS, EXTRUSION, HOT WORKING
Field(s)/Group(s):
Electrical and Electronic Equipment, Plastics
Report Date:
1962 Jan 01