DEVELOPMENT OF NICKEL BASE ALLOY SHEET FOR HIGH TEMPERATURE APPLICATION. MECHANICAL PROPERTIES OF INCO 713C SHEET

Duff, D. P.; Watson, P. D.

DEVELOPMENT OF NICKEL BASE ALLOY SHEET FOR HIGH TEMPERATURE APPLICATION. MECHANICAL PROPERTIES OF INCO 713C SHEET

Active / Technical Report | Accession Number: AD0600872 |

Open PDF

Abstract:

The elevated temperature tensile and stressrupture properties of Inco 713c sheet fabricated by the basic process described in ASD-TDR-62-869 AD-406 873 under closely controlled test conditions were measured. Tensile tests at 1900 and 1700 F and stress-rupture tests at 1800 and 1700 F were conducted on both Inco 713c specimens and Rene 41 control specimens by an independent test agency, Metcut Research Associates of Cincinnati, Ohio. The results of the tests confirmed that Inco 713c sheet had much higher tensile and stress-rupture strengths than Rene 41 at the selected test temperatures but the ductility of the Inco 713c sheet was found to be below normally accepted values for sheet alloys. A limited program was then conducted to demonstrate the feasibility of improving the ductility by minor modifications in the rolling and heat treating procedures.

Author(s):

Duff, D. P. ; Watson, P. D.

Author Organization(s):

LING-TEMCO-VOUGHT INC DALLAS TX

Descriptive Note:

Rept. for 1 Jun 1963-28 Feb 1964

Supplementary Note:

DOI: 10.21236/AD0600872

Annotation:

Mechanical properties of nickel base alloy sheet for high temperature application.

Pagination:

0027

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:

Approved For Public Release, Document Partially Illegible

Distribution Statement:

Availability: Document Partially Illegible.

RECORD

Collection: TR

Identifying Numbers

Report Number(s):

ASD-TDR-62-869

Contract/Grant Number(s):

AF-33-657-11160

Task Number(s):

735105

Project Number(s):

7351

Monitor Series:

TDR-62-869, ASD

Subject Terms

Joint Capability Areas:

JCA_6.4.1_Secure Information Exchange; JCA_5.3_Planning; JCA_5_Command and Control; JCA_6.4_Information Assurance; JCA_6_Net Centric

Communities of Interest:

Biomedical

Descriptor(s):

*SHEET METAL, *NICKEL ALLOY INCONEL, STRESSES, TENSILE STRENGTH, HEAT TREATMENT, DUCTILITY, CHEMICAL ANALYSIS, METALLOGRAPHY, ROLLING(METALLURGY), REFRACTORY METAL ALLOYS

Field(s)/Group(s):

Properties of Metals and Alloys

Keyword(s):

NICKEL ALLOY RENE 41, NICKEL ALLOY SHEETS, NICKEL ALLOY INCONEL 713C

Report Date:

1964 Apr 01