DEVELOPMENT OF A STABLE-BETA TITANIUM ALLOY.

reportActive / Technical Report | Accession Number: AD0429131 | Need Help?

Abstract:

Alloy bases Ti-17V-10Cr-3Al, Ti-8Mo-8V-7.5Fe 3Al, and Ti-15Mo-5Fe-3Al, containing additions of up to 5 of hardening agents such as Cu, Co and Ni, were water quenched from 1350 F, instead of plate cooled, but no appreciable difference in aging response was found. A marked aging response found when selected alloys were aged at 850 F in the as-cold rolled condition was attributed to alpha precipitation. Reduction of the Fe and Cr contents of the original base alloys and a corresponding increase in the Cu content did not significantly improve fabrication properties. Partial replacement of Fe and Cr by Ni resulted in hot shortness. The possibility of developing titanium alloys hardening by way of rejection of compound from an all-beta matrix is not promising using these additions. Author

Author(s):
Hunter, D. B.
Author Organization(s):
TITANIUM METALS CORP OF AMERICA NEW YORK
Descriptive Note:
Quarterly rept. no. 4, 1 Apr-30 June 63,
Annotation:
Development of a stable-beta titanium alloy. Attempts to develop an alloy hardening by means of compound rejection from a beta matrix.
Pagination:
0043

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Identifying Numbers
Report Number(s):
WAL-TR-405/2-3
Contract/Grant Number(s):
DA30 069ORD3743
Project Number(s):
DA59332008
Monitor Series:
TR-405/2-3
 Subject Terms
Communities of Interest:
No COI(s) Identified
Descriptor(s):
*ALLOYS, HARDENING, HARDENING, CHROMIUM ALLOYS, IRON ALLOYS, MOLYBDENUM ALLOYS, VANADIUM ALLOYS, ADDITIVES, COBALT, COPPER, NICKEL, COLD WORKING, QUENCHING, X RAY DIFFRACTION, HOT WORKING, STABILITY, HARDNESS, TEMPERATURE
Report Date:
1963 Jun 30