MECHANICAL AND PHYSICAL PROPERTIES ON MATERIALS-FIBERGLAS LAMINATE-FILAMENT WOUND FOR RADOMES

reportActive / Technical Report | Accession Number: AD0286778 | Need Help?

Abstract:

Physical and mechanical tests were made with material taken from 9 inches inside diameter, 17 inches long, 0.310 inch wall thickness filament-wound fiberglas cylinders. Each cylinder consisted of seven laminations four were in the longitudinal direction and were about 0.036-inch thick, and three were circumferential and about 0.060 inch thick. Filament winding was done with 60 end fiberglas roving stock and the binder used was Vibrin 135 TAC polyester resin. The properties determined were as follows tension, compression, shear, flexural, and bearing str ngths specific gravity resin content and water absorption. Author

Author(s):
Macy, P. R. ; Parker, W. M. ; Turner, H. C.
Author Organization(s):
GENERAL DYNAMICS/POMONA CALIF
Annotation:
MECHANICAL AND PHYSICAL PROPERTIES OF FILAMENT WOUND FIBERGLAS RADOME MATERIALS; SPECIFIC GRAVITY, WATER ABSORPTION, AND RESIN CONTENT.
Pagination:
0001

Security Markings

DOCUMENT & CONTEXTUAL SUMMARY

Distribution:
Approved For Public Release

RECORD

Collection: TR
Identifying Numbers
Report Number(s):
8926 015
Contract/Grant Number(s):
AF33 600 30169
 Subject Terms
Communities of Interest:
No COI(s) Identified
Descriptor(s):
*FILAMENT WOUND CONSTRUCTION, *GLASS TEXTILES, *LAMINATES, *RADOMES, BINDERS, ELASTIC PROPERTIES, ESTERS, PHYSICAL PROPERTIES, PLASTICS, POLYMERS, SHEAR STRESSES, TENSILE PROPERTIES, WIRE WINDING MACHINES
Report Date:
1959 Jun 23