DID YOU KNOW? DTIC has over 3.5 million final reports on DoD funded research, development, test, and evaluation activities available to our registered users. Click
HERE to register or log in.
Accession Number:
ADA063396
Title:
Fabrication of Sputtered Aluminum Nitride on Sapphire for Application in UHF SAW Frequency Filters.
Corporate Author:
UNITED TECHNOLOGIES RESEARCH CENTER EAST HARTFORD CONN
Report Date:
1978-09-01
Abstract:
Single crystal AlN films were grown by sputtering on single crystal 0001 oriented sapphire substrates. The substrate size was 25.4 x 9.0 x 2.0 mm. This size was chosen as a convenient size for the fabrication of UHF SAW frequency filters. The AlN was synthesized by reactive rf diode sputtering of a pure aluminum target in an ammonia atmosphere. Growth conditions were established which yielded clear, uniform, single crystal AlN films. Films were evaluated through microscopic examinations, interference spectrophotometric thickness measurement and electron channeling and X-ray diffractometer crystallographic analysis. Films ranged from 2 micrometers to 2.3 micrometers in thickness and were uniform to less than 0.1 micrometers across the long dimension of the substrate. Films were single crystal with the 0001 A1N direction parallel to the 0001 Al2O3 direction. Films were clear and smooth replicating the surface of the substrate. Twelve samples were delivered in accordance with the requirements of this program. Surface acoustic wave interdigital electrode transducers and delay lines were fabricated on samples identical to those delivered. Measurements of delay line performance at 201, 477, and 848 MHz were made to provide an estimate of the basic constants for surface acoustic wave excitation and wave propagation. Relatively low acoustic propagation loss was observed for all AlN on sapphire delay lines studied. Author
Descriptive Note:
Final technical rept. 1 Jul 77-1 Jun 78,
Supplementary Note:
DOI: 10.21236/ADA063396
Pages:
0058
Contract Number:
F19628-77-C-0188
File Size:
21.46MB
