Accession Number:

ADA612940

Title:

Low-Cost Structural Thermoelectric Materials: Processing and Consolidation

Descriptive Note:

Final rept. Oct 2013-Jan 2015

Corporate Author:

ARMY RESEARCH LAB ABERDEEN PROVING GROUND MD

Report Date:

2015-01-01

Pagination or Media Count:

28.0

Abstract:

The US Army requires the ability to generate electrical power on-the-move, operating in all environmental conditions and at all times of day. Waste heat from Army vehicles is a rich source of energy that usually is exhausted to the environment. Therefore, an opportunity exists to capture this waste heat and convert it into energy, thereby supplementing power generation and increasing output. The research objective of this seedling effort is to examine the feasibility of experimentally processing half-Heusler thermoelectric materials using existing powder processing capability at the US Army Research Laboratory. Two candidate low-cost half-Heusler thermoelectric materials were examined herein Fe Al V and Ti Ni Sn. These materials were processed using conventional powder metallurgy techniques with equal channel angular extrusion ECAE processing used for consolidation. Two studies were pursued and showed that ECAE temperatures above 400 600 C resulted in microstructure evolution that complicated the ECAE consolidation process. A copper canning material aided in the degree of powder consolidation, but further work is required to better understand the microstructure conditions that led to the poor consolidation in these alloys using ECAE consolidation.

Subject Categories:

  • Electric Power Production and Distribution
  • Thermodynamics

Distribution Statement:

APPROVED FOR PUBLIC RELEASE