Accession Number:

ADA550750

Title:

Federal Specification MMM-A-1617B for Adhesive, Rubber-Base, General-Purpose HAP-Free Replacement

Descriptive Note:

Final rept. 1 Mar-1 Sep 2010

Corporate Author:

ARMY RESEARCH LAB ABERDEEN PROVING GROUND MD

Report Date:

2011-05-01

Pagination or Media Count:

38.0

Abstract:

The goal of the Sustainable Painting Operations for the Total Army SPOT program is to significantly reduce the amount of hazardous air pollutant HAP emissions produced in coatings operations, including application and removal of adhesives and sealants. This report focuses on potential HAP-free replacements for Federal Specification MMM-A-1617B Adhesive, Rubber Base, General Purpose. A 180 peel adhesion test was conducted on a series of nine rubber-based contact adhesives using a variety of substrate combinations and conditioning parameters. The conditioning parameters consisted of various lengths of time, temperature, and immersion in liquids such as deionized DI water, IRM-901 reference oil, and JP-8 fuel. Three Clifton Adhesive, Inc., MMM-A-1617B qualified baseline contact adhesives containing HAPs were included in the test series. Clifton also provided three experimental contact adhesives that were either HAP free or low HAP and claimed to meet the MMM-A- 1617B requirements. Three possible HAP-free alternative contact adhesives made by the 3M Company were also included in the test series. The alternative, HAP-free 3M-847 adhesive consistently exceeded the minimum requirements for MMM-A- 1617B specification, while the Clifton products failed many of the minimum requirements.

Subject Categories:

  • Adhesives, Seals and Binders

Distribution Statement:

APPROVED FOR PUBLIC RELEASE