Accession Number:

ADA297586

Title:

Transient Scattering Response of an Airborne Target.

Descriptive Note:

Final rept.,

Corporate Author:

NAVAL COMMAND CONTROL AND OCEAN SURVEILLANCE CENTER RDT AND E DIV SAN DIEGO CA

Report Date:

1995-04-01

Pagination or Media Count:

36.0

Abstract:

The research team performed measurements in a bounded wave simulator to obtain the radar cross section RCS of a scale model of a particular airborne target. Measurements of the airborne target were obtained from two different flying orientations. The transient scattering response data were scaled to allow comparison with the RCS obtained by numerical methods for a full-size target. This document also presents the measurement procedure and data processing techniques that were used by the research team. METHOD A target was placed within the bounded wave simulator BWS area and was hit with an electromagnetic impulse, returning the scattered signal through the BWS for measurement in the control room. Measurements were also made of the background signal, as well as the in- cident signal. As the signals return to the control room below the BWS structure, the wave- forms are captured on an oscilloscope, then processed using Tektronixs Signal Processing and Display Package and Radar Cross Section program developed at NRaD. These programs convert the waveforms from time domain representations to frequency through the Fast Fourier Transform process. Further waveform processing allowed the calculation of RCS, which is the basis for target identification efforts using resonant frequencies. The measure- ment procedure and signal processing techniques are discussed in detail in the appendices. KAR P. 5

Subject Categories:

  • Computer Programming and Software
  • Active and Passive Radar Detection and Equipment

Distribution Statement:

APPROVED FOR PUBLIC RELEASE