Accession Number:

ADA273765

Title:

Flow Past a Circular Cylinder with a Permeable Wake Splitter Plate

Descriptive Note:

Annual rept. 1 Oct 92-30 Sep 93,

Corporate Author:

CALIFORNIA INST OF TECH PASADENA GRADUATE AERONAUTICAL LABS

Personal Author(s):

Report Date:

1993-08-01

Pagination or Media Count:

230.0

Abstract:

Measurements in the near wake region of a circular cylinder in a uniform flow in the Reynolds number range 2.5 . 103 approx. Re approx. 1.8 . 104 With permeable splitter plates spanning the wake center plane are presented. Permeability is defined by the pressure drop across the plates, and the relationship between permeability and plate solidity is determined for a set of plates constructed from woven wire mesh, permitting unambiguous characterization of the splitter plates by the solidity. The effects of different solidities on the flow in the near wake are investigated using smoke wire flow visualization, hot-wire anemometry, and measurements of the mean pressure at the cylinder surface, and the results are related to cylinder flow without a splitter plate. Flow visualization results demonstrate that the introduction of low solidity splitter plates does not change the basic near wake structure, and that sufficiently high solidity uncouples the large-scale wake instability from the body, with the primary vortex formation occurring downstream of the separation bubble due to instability of the wake profile. Hot-wire and surface pressure measurements confirm and quantify the flow visualization results, showing that the permeable splitter plates reduce the drag and modify the primary wake frequency. When the solidity is high enough that the wake is convectively unstable, the base pressure is independent of the Reynolds number and solidity. For a wide range of solidities, the same asymptotic value of the Strouhal number is reached at high Reynolds numbers. The relationship between the Strouhal number and the base pressure is discussed.

Subject Categories:

  • Fluid Mechanics

Distribution Statement:

APPROVED FOR PUBLIC RELEASE