Establishment of Engineering Design Data for Hybrid Steel/Ceramic Ball Bearings Phase II.
Final rept. Aug 79-Aug 80,
SKF TECHNOLOGY SERVICES KING OF PRUSSIA PA
Pagination or Media Count:
A lot of hybrid ceramicsteel angular contact ball bearings was fabricated to a design optimized for operation at 2.5 x 10 to the 6th power dN. Life tests were conducted on these were conducted on these bearings at low speed, 0.4 x 10 to the 6th power dN, using two load levels which produced maximum Hertz stress levels of 2.0 GPa and 2.4 GPa respectively. A detailed failure analysis was completed to define the causes of the relatively early ball failures experienced at the high load and verify the good performance achieved at the low load. Author
- Ceramics, Refractories and Glass
- Metallurgy and Metallography
- Machinery and Tools