Accession Number:
ADA089581
Title:
Recommendations for Upgrading RFSS to Meet Near-Term Requirements.
Descriptive Note:
Technical note,
Corporate Author:
MARK RESOURCES INC MARINA DEL REY CA
Personal Author(s):
Report Date:
1978-07-20
Pagination or Media Count:
2.0
Abstract:
After reviewing the plans for the near term it appears that several more taps are going to be required for the tapped-delay line modulator. To accommodate a range resolution of .02 microsec 10 ft we must space the taps by .01 microsec 5 ft for the extended target simulation. If the target is 60 ft in length, it will encompass 12 taps plus about 4 more for end effects. It is therefore recommended that the tapped-delay line modulator be extended to 16 taps. No additional digital processing hardware would be required for extended targets. For clutter we would require 32 taps and modulators on 3 channels if the clutter were independent from range gate to range gate. However, additional processing hardware would be required to generate the modulation signals, namely several approximately 4 AP120Bs. It is therefore recommended that a simpler form of clutter be implemented that is consistent with the hardware for the extended target simulation. Author
Descriptors:
Subject Categories:
- Computer Hardware
- Cybernetics
- Test Facilities, Equipment and Methods