Accession Number:

ADA031646

Title:

Design of a Nozzle Beam Type Metal Vapor Source.

Descriptive Note:

Research and development technical rept.,

Corporate Author:

ARMY ELECTRONICS COMMAND FORT MONMOUTH N J

Personal Author(s):

Report Date:

1976-10-01

Pagination or Media Count:

22.0

Abstract:

A prototype design of a directional high flux source for use in vapor deposition of electrode materials during fabrication of precision quartz crystal resonators is presented. The design is based on the theory and technology of nozzle beams. This nozzle beam type source is conceived 1 to permit large deposition rates with minimum wastage of electrode materials, 2 to operate in the high vacuum, 3 to emit vapor in a horizontal direction, thereby permitting the use of a pair of sources to plate both sides of a substrate simultaneously, and 4 to operate for extended periods without requiring frequent breaking of the vacuum in order to replenish the source. It is estimated that this design can operate at a deposition rate equal or above that of a conventional evaporation type source with less than one percent of the wastage of electrode material experienced with a conventional source. Author

Subject Categories:

  • Electrical and Electronic Equipment
  • Fabrication Metallurgy

Distribution Statement:

APPROVED FOR PUBLIC RELEASE