Accession Number:

ADA030891

Title:

Pore Pressures in Soft Ground under Surface Loading; Interpretation of Field Records

Descriptive Note:

Final rept. Jan 1975-Jul 1976

Corporate Author:

ARMY ENGINEER WATERWAYS EXPERIMENT STATION VICKSBURG MS

Personal Author(s):

Report Date:

1976-09-01

Pagination or Media Count:

45.0

Abstract:

Most soft clays in their natural state exhibit a small degree of overconsolidation resulting from changes in ground water level, delayed consolidation, or other causes. The overconsolidation ratio is commonly in the range of 1.0 to 2.5. Under surface loading, pore pressures in such a deposit will develop as for an elastic material until the effective stresses reach a yield condition or failure condition. In the latter case the soil can continue to carry additional total stresses within confined zones and pore pressures in these zones will continue to increase. In the former case the soil will continue to deform plastically until it reaches failure, showing, in general, different pore pressure responses in these two phases. Thus pore pressure response at any point in a soft clay deposit under increasing surface loading may show two or three distinct phases, although in some cases the plastic and failure responses may be almost indistinguishable. This report examines three published field records.

Subject Categories:

  • Soil Mechanics
  • Civil Engineering

Distribution Statement:

APPROVED FOR PUBLIC RELEASE