Accession Number:

AD0653068

Title:

FATIGUE OF STRUCTURAL ELEMENTS. STUDY OF RESIDUAL STRESSES IN LINEARLY VARYING BIAXIAL STRESS FIELDS.

Descriptive Note:

Progress rept.,

Corporate Author:

NAVAL APPLIED SCIENCE LAB BROOKLYN N Y

Personal Author(s):

Report Date:

1967-04-26

Pagination or Media Count:

63.0

Abstract:

A theory was developed for the calculation of relaxation strains effected by drilling a hole in a plate with a linearly varying stress field. With this theory a technique was developed for the measurement of residual stresses at the toe of tee fillet welds. The above technique was employed for the measurement of residual stresses at the toe of tee fillet welds in 1-12 in. HY-80 steel with the fillet in the as welded, ground, shot-peened, ground and shot-peened, and mechanically-peened condition. It was found that experimental data conforms to the assumed theory, and that residual stresses in as welded tee fillet welds in both the transverse and longitudinal directions approach the yield strength of the steel. It was also found that residual stresses are reduced approximately 25 percent by grinding, 50 percent by shot-peening and 50 percent by grinding and shot-peening. Mechanical-peening drastically affected residual stresses by converting high tension at the toe of the fillet weld to high compression of approximately the same magnitude. Author

Subject Categories:

  • Metallurgy and Metallography
  • Fabrication Metallurgy
  • Structural Engineering and Building Technology
  • Mechanics

Distribution Statement:

APPROVED FOR PUBLIC RELEASE