Accession Number:

AD0607421

Title:

PRODUCTION ENGINEERING MEASURE FOR THE PRODUCTION OF SILICON MONOXIDE CAPACITORS MICROELEMENT.

Descriptive Note:

Quarterly rept. no. 5, 31 May-31 Aug 64,

Corporate Author:

FEDERAL PACIFIC ELECTRIC CO NORWOOD MASS CORNELL-DUBILIER ELECTRONICS DIV

Personal Author(s):

• O'Connor,J. J.

Report Date:

1964-08-31

Pagination or Media Count:

27.0

Abstract:

Deposition masks were completed and used to fabricate all the required types of SiO capacitor microelements. The masks appear to be of correct dimensions. Commercially glazed and metallized substrates were tested and found satisfactory except for a thickness variation of 0.003 inch over specifications. Microelements fabricated on these substrates occasionally yielded capacitors with very low dissipation factors 0.1 -0.5 directly from the deposition cycle most elements however, had DF values near 4. A post-fabrication heat treatment is used to bring the DF below 1.5. Minor, but important modifications were made in the equipment, and the thin film monitor and microcircuit jig are operating satisfactorily. Author

Descriptors:

• *SILICON COMPOUNDS
• CAPACITORS
• MONOXIDES
• SUBMINIATURE ELECTRONIC EQUIPMENT
• ELECTRODES
• DIELECTRIC FILMS
• PRODUCTION

Subject Categories:

Distribution Statement:

APPROVED FOR PUBLIC RELEASE