PROCESS - BRAZING - STAINLESS STEEL TO TITANIUM EVALUATION
GENERAL DYNAMICS CORP FORT WORTH TX
Pagination or Media Count:
Tests were made to determine if commercially pure Ti tubing could be satisfactorily brazed to 321 stainless steel tubing and to evaluate the resulting brazed joint. The Ti tube was inserted into the expanded end of a stainless steel tube, and brazed with various amounts of 98 Ag-2 Li alloy foil and wire. The brazed tubes were then examined visually and metallographic specimens prepared. Salt spray specimens were prepared and exposed 100 hours. All the sections of the brazed joints that were exposed to salt spray failed within 100 hours.
- Couplers, Fasteners and Joints
- Fabrication Metallurgy