Accession Number : ADA600698


Title :   Electrospun Fibers for Composites Applications


Descriptive Note : Final rept. 1 Oct 2009-30 Jun 2013


Corporate Author : ARMY RESEARCH LAB ABERDEEN PROVING GROUND MD WEAPONS AND MATERIALS RESEARCH DIRECTORATE


Personal Author(s) : Orlicki, Joshua A ; Steele, Joshua ; Williams, Andre A ; Martin, George R ; Napadensky, Eugene ; Leighliter, B


Full Text : https://apps.dtic.mil/dtic/tr/fulltext/u2/a600698.pdf


Report Date : Feb 2014


Pagination or Media Count : 38


Abstract : A series of oriented electrospun nylon fibers were prepared with nominal fiber diameters of either 300 nm or 1 m. In addition, a series of similar mats were prepared that contained a hyperbranched polymer additive to act as a surface modifier for the fibers. The mats were used as reinforcements for epoxy composites. The composite coupons were interrogated using techniques such as dynamic mechanical analysis and tensile testing. While the nanofibers did not dramatically stiffen the resulting composites, they provided insight as to the impact of the additives on the interaction of the fibers with the composite matrix. The inclusion of the additive appeared to improve interfacial interactions of the fibers with the matrix, as reduced void content and uniform fracture interfaces were observed in the modified composites. While the low production rate of suitable fiber mats for this study limited the scope and accessibility of test specimens, the results from the examination of fiber-matrix interfaces argues for further investigation.


Descriptors :   *COMPOSITE MATERIALS , *FIBERS , EPOXY COMPOSITES , MATRIX MATERIALS , MECHANICAL PROPERTIES , SCANNING ELECTRON MICROSCOPY , TENSILE TESTERS


Subject Categories : Laminates and Composite Materials


Distribution Statement : APPROVED FOR PUBLIC RELEASE