Accession Number : ADA588588


Title :   Cryomilling of Thermoplastic Powder for Prepreg Applications


Descriptive Note : Final rept. 1 Mar 2012-30 May 2013


Corporate Author : ARMY RESEARCH LAB ABERDEEN PROVING GROUND MD WEAPONS AND MATERIALS RESEARCH DIRECTORATE


Personal Author(s) : Parquette, Brian ; Giri, Anit ; O'Brien, Daniel J ; Brennan, Sarah ; Cho, Kyu ; Tzeng, Jerome


Full Text : https://apps.dtic.mil/dtic/tr/fulltext/u2/a588588.pdf


Report Date : Sep 2013


Pagination or Media Count : 24


Abstract : The U.S. Army uses thermoplastic (TP) polyetherimide (PEI) prepreg for the manufacture of high-performance composite tank ammunition components. To manufacture the material, manufacturers typically use powder coating, in which TP powder is electrostatically deposited onto a fiber tow. Powder size and distribution have been major factors that determine the quality of prepreg. Cryomilling offers a powerful approach to produce powders with small particle size in bulk quantities by mechanical milling of starting powders with large particle size in a cryogen, such as liquid nitrogen. In this work, starting with 350- m powders, we use cryomilling to produce PEI powders suitable for prepregging with particle sizes of less than 20 m. For size characterization of the powders, wet sieving was found to be the most effective technique. Using this method, we determined that a milling time of 8 h at 400 rpm is sufficient to yield approximately 70% by mass of particles under 20 m.


Descriptors :   *COATINGS , *PARTICLE SIZE , *POWDERS , COMPOSITE MATERIALS , LIQUID NITROGEN , PREPREGS , SCANNING ELECTRON MICROSCOPY , THERMOPLASTIC RESINS


Subject Categories : Miscellaneous Materials


Distribution Statement : APPROVED FOR PUBLIC RELEASE