Accession Number : ADA537795


Title :   Gaseous Detonation-Driven Fracture of Tubes


Descriptive Note : Doctoral thesis


Corporate Author : CALIFORNIA INST OF TECH PASADENA GRADUATE AERONAUTICAL LABS


Personal Author(s) : Chao, Tong W


Full Text : https://apps.dtic.mil/dtic/tr/fulltext/u2/a537795.pdf


Report Date : Mar 2004


Pagination or Media Count : 308


Abstract : An experimental investigation of fracture response of aluminum 6061-T6 tubes under internal gaseous detonation loading has been carried out. The pressure load, with speeds exceeding 2 km/s, can be characterized as a pressure peak (ranging from 2 to 6 MPa) followed by an expansion wave. The unique combination of this particular traveling load and tube geometry produced fracture data not available before in the open literature. Experimental data of this type are useful for studying the fluidstructure-fracture interaction and various crack curving and branching phenomena and also for validation for multi-physics and multi-scale modeling. Axial surface flaws were introduced to control the crack initiation site. Fracture threshold models were developed by combining a static fracture model and an extensively studied dynamic amplification factor for tubes under internal traveling loads. Experiments were also performed on hydrostatically loaded preflawed aluminum 6061-T6 tubes for comparison. Significantly different fracture behavior was observed and the difference was explained by fluid dynamics and energy considerations. The experiments yielded comparison on crack speeds, strain, and pressure histories. In other experiments, the specimens were also pre-torqued to control the propagation direction of the cracks. Measurements were made on the detonation velocity strain history, blast pressure from the crack opening, and crack speeds. The curved crack paths were digitized. The Chapman-Jouguet pressure, initial axial flaw length and torsion level were varied to obtain different crack patterns. The incipient crack kinking angle was found to be consistent with fracture under mixed-mode loading. High-speed movies of the fracture events and blast wave were taken and these were used in interpreting the quantitative data.


Descriptors :   *TUBES , *DETONATIONS , *FRACTURE(MECHANICS) , HIGH SPEED PHOTOGRAPHY , PRESSURE , THESES , CRACKING(FRACTURING) , VELOCITY , GASES


Subject Categories : Pumps, Filters, Pipes, Tubing, Fittings & Vlvs
      Explosions
      Mechanics


Distribution Statement : APPROVED FOR PUBLIC RELEASE