Accession Number : ADA517348


Title :   Particle Size Control for PIV Seeding Using Dry Ice


Descriptive Note : Master's thesis


Corporate Author : AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH GRADUATE SCHOOL OF ENGINEERING AND MANAGEMENT


Personal Author(s) : Love, Brian T


Full Text : https://apps.dtic.mil/dtic/tr/fulltext/u2/a517348.pdf


Report Date : Mar 2010


Pagination or Media Count : 103


Abstract : Particle image velocimetry (PIV) has been carried out using solid carbon dioxide (CO2) particles as the seed material to continue the development of clean seeding for use in large-scale, closed-circuit tunnels. Testing occurred in two wind tunnels at subsonic and supersonic speeds using dry ice particles generated by allowing liquified CO2 to expand from a small diameter injector tube through a larger diameter shroud tube. The particles were injected into the plenum and discrete solid particles, suitable for PIV measurements, were present in the test section. Data on particle size were first collected using a Malvern particle size analyzer for three sizes of injector tubes, two sizes of shroud tubes, and two different types of shroud tubes: a simple tube and a static mixing tube. The injectors using the static mixing shroud tube and the simple shroud tube were each used in the adjustable throat supersonic blowdown wind tunnel at the Air Force Institute of Technology with a 6 inch by 6.5 inch crosssection. Particle size results for these two configurations suggested that the static mixing shroud tube decreased the Sauter mean particle diameter by a factor of three. In the tunnel, Mach 1.92 flow over a 10 degree ramp was produced and PIV images captured particles above the ramp, both upstream and downstream of the oblique shock while schlieren imaging provided insight into the flow conditions. Both the velocities far upstream and far downstream of the shock closely matched expectations, based on the wind tunnel instrumentation. Particle lag for the flow across the shock was quantified for the two cases, and despite the substantial, quantified differences in particle size measured at the shroud tube exit, the results for both shroud tubes were generally consistent with a theoretical response of a 2 micron particle. Finally, for the first time particles were injeinch cross-sectthat PIV using CO2 particles may be robustly implemented


Descriptors :   *PARTICLE SIZE , *PARTICLE IMAGE VELOCIMETRY , INJECTORS , WIND TUNNELS , TUBES , THESES , SHOCK WAVES , CARBON DIOXIDE


Subject Categories : Test Facilities, Equipment and Methods


Distribution Statement : APPROVED FOR PUBLIC RELEASE