Accession Number : AD0474098
Title : ORIENTED NON-CONTINUOUS FIBER REINFORCEMENT FOR STRUCTURAL COMPOSITES.
Descriptive Note : Final technical summary rept. Sep 64-May 65,
Corporate Author : OWENS-CORNING FIBERGLAS CORP GRANVILLE OH
Personal Author(s) : Kane, John L. ; Lindsay, Edwin M.
Report Date : AUG 1965
Pagination or Media Count : 50
Abstract : A method for orienting non-continuous 3.5 mil glass fibers, 3/8 - 1/2 inch long, into a tape was developed. A converging V groove trough provided the mechanism of orientation. The non-continuous fiber tape was made on a Mylar carrier tape which was subsequently stripped before producing composites. Other methods which showed promise for orientation of smaller diameter fibers were mechanical and electrostatic flocking followed by combing. The 3.5 mil non-continuous fiber composites were relatively weak with with fracture occurring at end of the fiber through the resin, rather than through the fiber. An investigation of methods for orienting smaller diameter discontinuous fibers is planned in follow-on work to determine whether a high percentage of the strength of these fibers can be utilized in composites. (Author)
Descriptors : *GLASS TEXTILES), (*COMPOSITE MATERIALS, MANUFACTURING, PROCESSING, ALIGNMENT, VIBRATION, DRYING, TENSILE PROPERTIES, QUALITY CONTROL, CONVEYORS, TAPES.
Subject Categories : CERAMICS, REFRACTORIES AND GLASS
LAMINATES AND COMPOSITE MATERIALS
Distribution Statement : APPROVED FOR PUBLIC RELEASE